Nubert nuConnect trX, Инструкции по безопасности Технические данные Руководство по эксплуатации Условия гарантии

Страница: 19 / 24

nuConnect trX
19
07/2020 EN
– room-correction software of the AVR.
– The speakers, connected via the trX, need to be set at a relatively high volume. This
is normal and does not impact performance.
Connecting your TV wirelessly to a nuConnect ampX
Devices
Transmitter: nuConnect trX connected to the
(examples) optical output of your TV
Receiver: nuConnect ampX
You can transmit the sound from your TV to your nuConnect ampX using the trX.
• Connect the trX to the optical output of your TV and configure it as a transmitter
(optical in, pink LED) and pair it with the ampX.
Note:
– The ampX must configured as wls slave .
– A direct connection to nuPro X speakers is not recommended, as these do not
provide control functions in slave mode.
Connecting your PC wirelessly to a Nubert X-series Soundbase
Devices Transmitter: nuConnect trX connected to the USB port of a PC
(examples)
Receiver: nuPro XS-7500
You can use the trX to play the music stored on your PC on your Soundbase.
• Connect the trX to a USB port on your PC.
• Configure the nuConnect trX as the transmitter (USB-DAC, white LED) and
pair it with your Soundbase ( setup / wls slave ). You can still use and operate your
Soundbase normally. To listen to music from your PC, select the wireless input
on the Soundbase.
Note:
Instead of the Soundbase, you can connect and use the nuConnect ampX in the
same way.