Nubert nuConnect trX, Инструкции по безопасности Технические данные Руководство по эксплуатации Условия гарантии

Страница: 12 / 24

nuConnect trX
12
07/2020 EN
Concept
The nuConnect trX is a so-called transceiver, meaning it can be configured as either
a transmitter or a receiver, depending on application. To create a completely wire-
less chain using only the trX, you need two trX’s: One configured as a transmitter,
one configured as a receiver.
When used as part of the Nubert X-Connect system, the trX is compatible with a
variety of speakers and devices, e.g. nuPro X and XS speakers, nuSub XW subwoof-
ers and the nuConnect ampX. When used together with any of these speakers and
devices you will normally need only one trX.
The nuConnect trX can be used in many different ways and configurations – read
more about some of the typical applications on the backside of this manual.
1. Placement
Make sure the nuConnect trX is placed on a level, solid surface and that it has
enough free space around it to allow air to circulate freely.
2. Connections
Connect all cables before you start configuring the trX. Use the supplied cables and
adapters and connect the signal cables first.
You have the following options:
Transmitter mode – connections are inputs :
– Line in (3.5 mm combo-jack)
– Optical in (3.5 mm combo-jack)
– USB in (USB-C socket)
Receiver mode
– connections are outputs :
– Line out (3.5 mm combo-jack)
– USB Port out (USB-C socket)