01. 09. 21. Document Number 671711
2
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
SVTC8
Installation Manual
1.2 Important Information
This manual contains important information on the safe and
appropriate assembly, transport, commissioning, operation,
maintenance, disassembly and simple troubleshooting of the product.
While the product has been manufactured according to the accepted
rules of current technology, there is still a danger of personal injury or
damage to equipment if the following general safety instructions and
the warnings contained in these instructions are not complied with.
•
Read these instructions completely and thoroughly before
working with the product.
•
Keep these instructions in a location where they are accessible
to all users at all times.
•
Always include the operating instructions when you pass the
product on to third parties.
1.3 Personal Protective Equipment
The following minimum Personal Protective Equipment (PPE) is
recommended when interacting with Nuaire product:
•
Protective Steel Toed Shoes -
when handling heavy objects.
•
Full Finger Gloves (Marigold PU800 or equivalent) -
when
handling sheet metal components.
•
Semi Fingerless Gloves (Marigold PU3000 3DO or equivalent)
- when conducting light work on the unit requiring tactile
dexterity.
•
Safety Glasses
- when conducting any cleaning/cutting operation
or exchanging filters.
•
Reusable Half Mask Respirators
- when replacing filters which
have been in contact with normal room or environmental air.
Nuaire would always recommend a site specific risk assessment by a
competent person to determine if any additional PPE is required.
2.0 INTRODUCTION
The Nuaire SVTC8 unit comprising fan/motor assembly shall be
certified for high temperature operation at 400°C for 2 hours. The
range shall have been type tested to EN12101-3.
The units shall be either 2 speed or inverter driven providing, low speed
for day to day environmental ventilation and one off operation for
emergency ventilation (S1 duty).
The Nuaire SVTC8 unit shall have an inlet guard for safety purposes and
also to prevent debris being sucked through the fan.
EN12101-3 compliant.
2.1 Code Description:
SVTC8 - 50 T8 G
| | | | |
1 2 34 5
1. Range:
Induction Centrifugal Fans, 400°C for
2
hrs
2. Performance Size:
50 = 50N
100
=
100N
3. Motor Speed:
No Affix = Single Speed (Suitable For
Frequency
Inverter)
T
=
2
Speed
4. Motor Poles:
No Affix = 4 Pole
8 = 8 Pole
5. Electrical Motor Details:
No Suffix = 400V / 50Hz
G = 460V / 60Hz
J = 380V / 60Hz
Inlet
Discharge
1
Unit Airflow Directions
3.0 DELIVERY & HANDLING
All equipment is inspected prior to despatch and leav
es the fa
ctory in
good condition. Upon receipt of the equipment an inspection should
be made and any damage indicated on the delivery note. Particulars of
damage and/or incomplete delivery should be endorsed by the driver
delivering the goods before offloading by the purchaser.
No responsibility will be accepted for damage sustained during the
offloading from the vehicle or on the site thereafter. All claims for
damage and/or incomplete delivery must be reported to Nuaire within
two days of receipt of the equipment.
Always handle the units carefully to avoid damage and distortion. If
mechanical aids are used to lift the unit, spreaders should be employed
and positioned so as to prevent the slings, webbing etc. making contact
with the casing.
