Western Industrial Estate, Caerphilly,
Mid Glam CF83 1XH United Kingdom.
Telephone: 029 2088 5911 Facsimile: 029 2088 7033,
Email: [email protected]
www.nuaire.co.uk
Leaflet No. 670628
Technical or commercial considerations may, from time to time,
make it necessary to alter the design, performance and dimensions
of equipment and the right is reserved to make such changes
without prior notice.
Installation and Maintenance
OPUS 12V (R range)
Maintenance
General
It is inevitable that some dust, fluff etc. will pass through the
filters, and which, if allowed, will build up internally on
motors and impellers, shortening the life of the unit and, in
severe cases, leading to overheating of the motors.
Consequently, it is strongly recommended that all units are
inspected and cleaned every six months. To clean the filters,
remove them from the unit, wash in tepid water to which a
little mild detergent has been added. Shake out excess water
and allow to dry naturally. Replace when dry.
Isolation
Ensure that the unit is totally isolated from the electrical
supply. This is particularly important when dealing with a
run-on circuit (letter S in the Model Code).
THE INPUT SOCKET TERMINALS WITHIN THIS
UNIT REMAIN LIVE, EVEN WHEN THE ROOM
LIGHT OR OTHER ACTUATING SWITCH IS OFF.
Take care therefore when working within the case with the fan
module removed.
Procedure
At all times, take care not to damage, distort or disturb the bal-
ance of the impellers. Remove the cover and then the fan
module after releasing the spring clips. Inspect all parts.
With a brush or dry cloth clean the backplate. Lightly brush
away dust and dirt from the fan module.
If stubborn, carefully remove with a suitable blade or scraper.
Wash the cover in warm soapy water. Dry thoroughly. Refit
the fan module, followed by the cover.
Test/run.
Adjusting the run-on timer.
Remove cover. Locate the Time Delay Adjustment at the
plastic box integral with the fan module. Re-set against the
graduated scale. Re-fit the cover.
Warranty
The plastic control box integral with the fan assembly is a
sealed component. Breaking the plastic sealing tie will invali-
date the guarantee. The unit is guaranteed for a period of 3
years.
Service
As a manufacturer NuAire provides you with factory trained
Service Engineers.
Our Engineers are supported by a comprehensive range of
spare parts 'off the shelf'.
If you are an industrial or commercial user, you may be inter-
ested in details of NuAire's regular maintenance Service
Contracts. This is a worthwhile service that helps you get the
most from our products.
Our Service Department will be happy to give you more
information.
Please telephone:
029 2085 8585
Controls Application Service (CAS)
A team of Engineers and technicians is available to provide pre
and post order support.
We are on hand to provide help and advice from the most basic
use of any NuAire equipment to the more complex applica-
tions, maximising on the versatility of our SMART and
NetLink control products.
Telephone:
029 2085 8585
Facsimile:
029 2085 8586
3 Year Warranty
The three year warranty starts from the date of delivery and
includes parts and labour for the first year.
The labour element is subject to full, free and safe access to the
equipment as recommended by the CDM regulations.
The remaining two years covers replacement parts only.
NOTE:
Installation & Maintenance of the equipment must be as
directed in the instructions provided with the unit.
GP145
NB
If you have any comments or
queries on any of our products or
services please write to the Product
Information Manager at the main
address opposite.
