NuAire NALTF Series Скачать руководство пользователя страница 5

5

15. 05. 17. Leaflet Number 671269

NALTF/TRF 

Roof and Plantroom Twinfans

6.0 Replacement of Parts

Drive belts are the only servicable items on these fan units.

 

With time and fair wear and tear it may be necessary to

 

replace fan assemblies or motors - consult the fan rating

 

plate detail when ordering.

Note: Isolate the Electrical Supply

Remove the top access panel. Disconnect the wiring to the

 

motor assembly.  Remove the old unit.  Replace the fan/

motor assembly. Re-connect the supply to the motor. Check 

for correct rotation  and operation and replace the top 

access panel.

Spare Parts

When ordering spares please quote the serial number of the

 

unit. This number will be found on the identification plate

 

attached to the unit mounting frame.  Please give a full

 

description of the part required.

7.0 Warranty

The unit has a one year warranty. The warranty starts 

from the date of delivery and covers faulty materials or 

workmanship and includes parts and labour. The labour 

element is subject to full, free and safe access to the 

equipment as recommended by the CDM regulations. 

This warranty is void if the equipment is modified without 
authorisation, is incorrectly applied, misused, 
disassembled, or not installed, commissioned and 
maintained in accordance with the details contained in this 
manual and general good practice. 

The product warranty applies to the UK mainland and in 
accordance with Clause 14 of our Conditions of Sale. 
Customers purchasing from outside of the UK should 
contact Nuaire International Sales office for further details.

8.0 After Sales Enquiries

For  technical  assistance  or  further  product 
information, including  spare  parts  and  replacement 
components,  please contact the After Sales Department.

Telephone 02920

 

858

 

400

 

Содержание NALTF Series







Отзывы: