Installation and Operating Instructions
ES-LCD User Control
When exiting the programming screen, there is an option to
give Program A and Program B a more meaningful name to
reflect how the program should be used.
Press ‘Yes’ if this is required.
Enter the new name for the program; the above screen will
pop up twice; firstly for Program A and the second time for
Program B.
Press ‘Enter’ will store the new name and move on to next
page. Please note that pressing ‘Enter’ without actually
entering any character will change it back to the default
names.
Press ‘Exit’ would ignore the entry and retain the
old name.
3.4 PIN Protection of Program
When leaving the programming section, you will be prompted
to enter a four character PIN code to prevent unauthorised
changes to the program. Just type in any four characters
that you can easily remember and press ‘Enter’ to protect the
programs.
When PIN protected; the correct PIN must be entered before
any changes can be made to the programs. If this facility is
not needed then do not enter any characters; just press
‘Enter’ to skip this function.
Note: Press ‘Exit’ will retain the old PIN code.
Press ‘Enter’ without any characters will disable PIN
protection.
It is possible to prevent unauthorised changes to the settings
in the Status Screen using the same PIN code (this is the
default screen of the control).
Press ‘Yes’ to lock the Status screen.
The four buttons that change the operation of the control
can be individually locked by the PIN code. Press the relevant
box to toggle between Yes and NO; yes means the button will
be locked by PIN.
Press ‘Exit’ when you are happy with the settings.
6
11. 05. 17. Leaflet Number 671415
