3
Installation and Operating Instructions
ES-LCD User Control
11. 05. 17. Leaflet Number 671415
3.0 Operation
WARNING: Do not use a sharp object on the touch screen
(e.g. the writing point of a pen), this will cause irreparable
damage to the surface of the touch screen.
Always use the tip of finger or other rounded object.
The ES-LCD operates via a set of menus.
It can control the function of the fan by manual setting or
using a set of timed programmes. The control will guide you
through the initial set up routine via menus when the unit is
initially switched on. Please note these settings could be
changed subsequently if needed.
Upon initial power up, the unit will request the following
are set up:
■
Day and time; see 3.1
■
Initial system settings (i.e. to define any heating
cooling elements fitted to the Ecosmart fan and to
give the system an easily recognisable name); see 3.2.
■
Any custom timed programs; see 3.3.
All the menus will operate in the same manner:
Perameters that could be changed have a light background.
Press the box to highlight the value that needs to be changed
then use the adjustment buttons (‘<’ and ‘>’) to change the
value. Help is available for each perameter; touch the relevant
perameter and then press help.
3.1 Day & Time
The above screen is used to set up the current day and time.
Press ‘Exit’ to save the settings and exit this menu.
Season:
the options available are ‘GMT’ Greenwich Mean
Time or ‘BST’ British summer time (daylight saving time).
Changing from GMT to BST will automatically increase the
time by 1 hour and vice-versa.
Time:
this is a 24hr clock adjustable to the nearest minute.
The range is 00:00 (midnight) to 23:59.
Tip: if you keep your finger on the < or > button it will
speed up the change.
Day:
day of the week; options are Monday to Sunday inclusive.
3.2 Initial System Setting
This screen allows a meaningful name to be assigned to the
control so that the system it controls can be easily identified.
Up to 20 characters (including spaces) could be assigned.
To make any changes; use the cursor control buttons to
move the cursor, then either ‘Delete’ the character or replace
it with another character.
Press ‘Save’ to save the name.
Press ‘Exit’ to exit this screen and enter into the second
part of this menu.
Press the appropriate box to toggle between ‘Yes’ and ‘No’;
e.g. if LPHW heating is fitted in the fan; change the LPHW
heating setting to ‘Yes’ by pressing the box adjacent to LPHW
heating.
Press ‘Exit’ to exit this menu.
Please note: the LCD will go blank after 30 secs of inactivity
to save power and to increase service life. Touch any part of
the screen to re-activate the LCD. When the LCD control is
powered up, the screen will stay blank for approximately
20 secs while the system loads the software.
