NuAire DRIMASTER 365 Скачать руководство пользователя страница 7

14.0  Maintenance

The unit does not require any maintenance other than a filter change
and a check of electrical connections every 5 years. The status light
on the user control panel will flash red when a filter change is
required.

New filters can be purchased direct from Nuaire using the following
code: 775631 (5 year filter).

If the status light is permanently red, or if the units performance has
been reduced dramatically and there is no flashing red light, please
contact our service department.

Dust can occassionally accumulate through static, on the diffuser
and the adjacent ceiling. This can be removed if required by 
vacuuming.

Note: A clear distance of 500mm should be available above the
unit to allow access for maintenance.

14.1  Filter Change

Once every 5 years the status LED on the main user control will
flash red. This indicates filters need changing.

a) Make sure power to the unit is off.

b)  Open the lid of the Air Handling Units by removing the 6 

screws which hold the lid on.

c) Remove the 2 filters in each Air Handling Unit by pulling 

them away from the rim. (green fan housing).

d) Replace the filters by pushing the metal rim into the slots on 

the green fan housing.

e)

Replace and secure the lids.

f)

Reset the LED light that was flashing, by:

i) 

Turn the power to the unit on.

ii) 

Press and hold the black push button switch on master 
control switch.

iii) 

A number of LED patterns will show.

iv)  When

shows up release the button.

v) 

The led light should now be reset.

15.0  Warranty

The unit has a 5 year warranty starting from the day of delivery and
includes parts and labour for the first year. The remaining 4 years
covers parts only. This warranty is conditional on the following:-

a)

That the unit is installed strictly in accordance 
with this guide.

b)

That the unit filters are removed and cleaned or replaced 
at the recommended intervals.

16.0 Service Enquiries

Nuaire can assist you in all aspects of service. Our service 
department will be happy to provide any assistance required, 
initially by telephone and If necessary arrange for an engineer 
to call.

Telephone 02920 858 255

Installation and Maintenance

Low Energy Positive Input Ventilation Unit

420

960

330

80

13.0  Dimensions 

(in mm)

and weights

7

Leaflet Number 671347 October 2007

Figure 15. Diffuser.

290

305

200 dia.

62

33

8

25

Figure 16. Main fan unit

Power

Status

163

75

30

Figure 17. User control.

Main fan unit 
weight 21 kg.

Technical or commercial considerations may, from time to time, make it necessary to alter the design, performance and 

dimensions of equipment and the right is reserved to make such changes without prior notice.

ON OFF 

OFF

Содержание DRIMASTER 365









Отзывы: