7
15. 03. 21. Document Number 671846
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
DRI-ECO-HEAT-HCS
Installation Manual
14.0 FREQUENTLY ASKED QUESTIONS
While very rare, issues with newly installed units can occur. Typically
these issues can be easily solved by referring to the below table.
Symptom
Cause
Solution
Fan not
running.
NO power to the unit
(Display is NOT lit).
Ensure unit has not been
switched off or that the local
fuse has not blown.
Software error -
Power to the unit
(Display is lit).
If electricity present, power
off, wait and power on again
– this may restart the unit.
Fan failure - Power to
the unit (‘F’ is flashing
on display).
Fan has failed and a
replacement unit is required.
High loft
temperature.
This is normal, see
temperature control options.
15.0 AFTER SALES AND REPLACEMENT PARTS
For technical assistance or further product information, including spare
parts and replacement components, please contact the After Sales
Department.
If ordering spares please quote the serial number of the unit together
with the part number, if the part number is not known please give a full
description of the part required. The serial number will be found on the
identification plate attached to the unit casing.
A QR code linking directly to the Nuaire website is located behind the
diffuser plate and can be used to order spare parts and replacement
components.
Telephone 02920 858 400
Technical or commercial considerations may, from time to time,
make it necessary to alter the design, performance and dimensions
of equipment and the right is reserved to make such changes without
prior notice.
