199
Ma
il
7
OK
Information
Depending on the radio wave conditions, the characters might not be displayed
correctly at the destination.
If you send an i-mode mail message to other carrier’s mobile phone with a pictograph
entered, the pictograph is automatically converted into a similar pictograph at the
receiving end. Depending on the model or function of the receiving end’s mobile
phone, however, the pictograph might not be correctly displayed or be converted into
a character or “=” when no corresponding pictograph is found.
When the number of sent mail messages exceeds the FOMA phone’s storage
maximum, they will be overwritten from the oldest one. However, protected sent mail
messages cannot be overwritten.
You cannot compose an i-mode mail message when the number of sent mail
messages in the Outbox has reached the maximum and those messages are all
protected, or when 20 mail messages are saved to the Draft or the Draft is full.
Release the protection for sent mail messages, or send/delete draft mail messages,
and then operate again.
When you select “Compose message” from the Function menu such as when
entering a phone number, the mail address is entered as a destination address if the
phone number and mail address are stored in a Phonebook entry. When multiple mail
addresses are stored in the Phonebook entry, the first mail address is entered.
If you try to send the mail whose address is a phone number headed by “184”/“186”,
the confirmation display appears asking whether to delete prefix numbers and send
the mail.
You cannot send mail to the addresses that include a comma (,).
You can enter an address in the To, Cc and Bcc fields.
If the destination address has been stored in the Phonebook with a secret code, the
secret code will be added automatically at sending. However, even if a secret code is
stored in the Phonebook, the secret code will not be added and the mail will be sent
as ordinary i-mode mail unless the address is a phone number or “phone
[email protected]”.
If you store the secret code and send mail to a mail address other than that of DoCoMo
mobile phones, you might not receive the error message for unknown address.
The recipients might not be able to receive the full length of the subject depending on
their phones.
You can send up to 2,000 full-pitch characters in text to the i-mode phone of the mova
service.
Each line feed is counted as one full-pitch character, and a space is counted as one
full-pitch or half-pitch character.
The mail message you entered a Deco-mail pictogram becomes a Deco-mail
message.
In B Mode of 2in1, you cannot compose i-mode mail.
Function Menu of the Message Composition Display
Information
Function menu
Operation/Explanation
Send
You can send the mail message.
Go to step 7 on page 199.
Preview
Check the address, subject, text and attachments before
sending.
You can send the mail message by pressing
l
(
).
Save
When composing or editing the mail, you can save it to the Draft.
Operate receiver
(Add receiver)
You can add multiple addresses in the address field to send the
same i-mode mail to multiple recipients simultaneously. You can
send the same mail to up to five addresses at the same time.
Add receiver
Select an item.
Phonebook
. . . . . . . . . Call up a Phonebook entry and select a
phone number or mail address.
Sent address
. . . . . . . Select a phone number or mail address
and press
O
o
(
).
Received address
. . . Select a phone number or mail address
and press
O
o
(
).
Enter address
. . . . . . . Enter a mail address or phone number.
To consecutively add addresses, select <Not entered> and
repeat the above operations.
Press
i
(
) and select “Delete receiver” to delete the
selected mail address. Select “YES”.
Press
i
(
) and select “Change rcv. type” to change the
type of mail. (See page 200)
Select an entered mail address on the Mail Composition display
to show the Address list.
l
(
)
Operate receiver
(Delete receiver)
You can delete the selected address when there are multiple
addresses.
Delete receiver
YES
Содержание FOMA P906i
Страница 92: ...90 ...
