-7-
-4-
F.Us ing the R e m ote C ontr ol Fe a tur e (Optiona l)
This sender system not only allows you to send crisp audio/video from one area to
another, it also gives you the ability to control the source using your existing remote
control device. It converts the infrared (IR) signal emitted by your remote control
to a radio frequency (RF) signal in the receiver and sends it back to the transmitter
where the RF signal is converted back to the original IR signal and control the audio/video
source such as DVD ,DVR, VCR , etc.
In order to obtain optimum performance of the remote control extender, please
operate as follow:
The first you need to plug the IR extender provided in the IR extender port of the
transmitter and put the IR eye close to IR receiving window of A/V source, and then
aim the existing remote control at the IR window of the receiver within 5 meter.
Following is the example for DVD Player installation:
1.
Transmitter(TX) uses orange color jack IR extender cable, and Receiver(RX)
uses black color jack IR extender cable as below:
C.Pr oduc t La y out
Front View
Back View
2. Install IR Cable
2.1. Transmitter's IR to the IR of DVD Player:
For digital wireless camera
Back view
Pairing button inside
