User guide Penta 720-800A Base unit
Doc no. 720-8001-A-4
Rev. date 131030
Page 8 of 13
Rear panel layout.
Rear panel layout
Rear panel layout
1.
Card slot 1 to card slot 8
2.
Mini module slot
3.
Mains inlet 2.
4.
Mains inlet 1. The base unit is equipped with one power supply unit mounted with two
redundant power supplies. Each power supply is connected to its own power inlet. Both mains
inlets must be connected to either the same mains supply or to two individual supplies for fully
redundant operation.
5.
AES/EBU input and output. 25 pole D-sub female connector. AES/EBU I/O channel 1-4
6.
AES/EBU input and output. 25 pole D-sub female connector. AES/EBU I/O channel 5-8
7.
MADI input and output BNC connector, MADI I/O number 1
8.
Dig Link interface port for Pro Tools HDX, Primary port
9.
Dig Link interface port for Pro Tools HDX, Primary port or Secondary port (configurable)
10.
Word Clock or Video Black Burst sync. input BNC connector (configurable)
11.
Word Clock sync. output BNC connector
12.
AES11/AES3 sync. input XLR female connector
13.
Ethernet control and IP audio Primary port (net 1) RJ45 connector
14.
Ethernet control and IP audio Secondary port (net 2) RJ45 connector
15.
Reconfigure button, and status LED
