NTI XTENDEX 300 Foot DVI Video and IR Extender
1
INTRODUCTION
The XTENDEX Series ST-C6DVI-IR-300 CAT6 DVI and IR Extender (XTENDEX) is designed to enable the video output from one
digital video source to be viewed by a remote user. Each video extender consists of a local unit that connects to an DVI video
source and optional IR emitter, and a remote unit that connects to an DVI display and optional IR receiver as much as 300 feet
away via Category 5e,6, 6a or 7 twisted-pair cable.
The XTENDEX Series Extender is extremely simple to install and has been thoroughly tested to insure reliable performance.
Through the use of CAT5e/6/6a/7 (CATx) cable it is possible to economically increase the flexibility of a computer system. Here
are some of the features and ways this can benefit any workplace:
Allows the placement of an DVI-enabled monitor in a location where only these parts are needed without having the
video source there too, taking up valuable space
Allows digital video to be viewed and heard by a remote user (up to 300 feet away)
Provides crisp and clear computer resolution to 1920 x 1200 and HDTV resolutions to 1080p (see page 8 for more
details)
Transmits DVI signal over one CATx cable.
Only one power supply is necessary (Power supply can be connected to either the local or remote unit.)
Supports a DVI monitor.
HDCP 1.2 compliant
Supports the DDC2B protocol.
Supports 480p, 720i/p and 1080i/p video formats
MATERIALS
Materials Included with ST-C6DVI-300 kit:
NTI ST-C6DVI-IR-300 Local Unit
NTI ST-C6DVI-IR-300 Remote Unit
1-100VAC to 240VAC at 50 or 60Hz-24VDC/1.0A AC Adapter
1- Power Cord- country specific
3 Foot IR-EMITTER (IR-EMTR-3)
3 Foot IR-RECEIVER (IR-RCVR-3)
Additional materials may be required but are not supplied:
CAT5e solid/stranded UTP ; 6/6a solid UTP; CAT7 solid STP (CATx) twisted-pair cables terminated with RJ45 connectors
wired straight thru- pin 1 to pin 1, etc. (see page 8 for proper EIA/TIA 568 B wiring method)
DVI-IS-xx-MM DVI-I male to DVI-I male single link cable to connect a DVI source or display (where xx=3, 6, 10, or 15 foot
cable)
Always use the shortest possible cable for best performance.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at
http://www.networktechinc.com
and we will be happy to be of assistance.
