NTI VOPEX SERIES SPLITTER/EXTENDER
7
ST-C5VA-R-600 and ST-C5V-R-600 Remote Unit
Note: This section is applicable to both models of Remote Unit except for step 3. When installing ST-C5V-R-600
Remote Units (no audio support), disregard step 3.
1.
Position a ST-C5VA-R-600 Remote Unit such that the CAT5 cable, the monitor cable, speaker cable,
and the AC adapter power connector can each reach the Remote Unit comfortably.
2.
Connect the remote user's monitor cable to the female 15HD video connector on the Remote Unit.
3.
Connect the remote user's speakers to the 3.5mm female stereo connector on the Remote Unit (see
Fig. 3).
Figure 3- Make connections to 600 Foot XTENDEX Remote Unit
Note: If an RJ45 wall outlet is being used, connect the other end of the extension cable to the RJ45
wall outlet.
WARNING: Never connect the ST-C5VA-R-600 Remote Unit to an Ethernet card, Ethernet router, hub or
switch or other Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet
may result.
4
. Repeat steps 1-3 for each ST-C5VA-R-600 Remote Unit to be connected to the VOPEX.
5. Connect CAT5 cable as described on page 8.
!
