4
Notes:
1. When connect
ing an
HDMI display
to the Loop Out
port, make sure
the
HDMI cable connects to
"
Input 1
"
of
the
HDMI display.
2. It is recommended
to use unshielded CATx
cable.
3. When using
shielded
cable, the transmission distance might be shorter. (
i.e.
CAT6a: 25-30M,
CAT7:25- 40M)
4. The cable must be straight,
avoid rolling
the cable to avoid crosstalk interference.
RJ45 Pinout
(
Wiring to
TIA/EIA-568B)
RS232 Wiring
HyperTerminal setting
s
:
〔
57600bps (8-N-1)
〕
Note: Pins not shown in table have no connection
RS232 Command Table
Command
Description
OFF 1(Enter)
OUTPUT 1 OFF
OFF 2(Enter)
OUTPUT 2 OFF
OFF 3(Enter)
OUTPUT 3 OFF
OFF 4(Enter)
OUTPUT 4 OFF
OFF 5(Enter)
HDMI LOOPOUT OFF
ON 1(Enter)
OUTPUT 1 ON
ON 2(Enter)
OUTPUT 2 ON
ON 3(Enter)
OUTPUT 3 ON
ON 4(Enter)
OUTPUT 4 ON
ON 5(Enter)
HDMI LOOPOUT ON
TIA/EIA-568B Pinout
PIN
Wire Color
1 Orange-white
2 Orange
3 Green-white
4 Blue
5 Blue-white
6 Green
7 Brown-white
8 Brown
RS232
Pin
Signal
2 TX
3 RX
5 GND
By default, all Outputs and the HDMI Loopout are ON.
Note: After a reboot/power cycle,
the VOPEX-C5HD-4LC will
return to default settings.
