NTI ST-nXm-USBV-U, Инструкция по установке и эксплуатации

Страница: 5 / 28

3
•
Security features can be enabled on a user port by user port basis.
•
A microprocessor is dedicated to each CPU, preventing connected CPUs from locking up.
•
Any input device cable can be hot-plugged.
•
Typically the LCD display indicates the CPU to which each user is connected.
•
10 configurations can be saved in memory by the user for instant setup recall.
•
No dip-switches or jumpers necessary to configure.
•
Video formats up to 1900X1200 can be displayed from all platforms. (A VGA multi-scan monitor must be used.)
•
Users can control the switch using the On Screen Display (OSD):
•
RS-232 control allows control of the switch with one CPU serial port. (Windows-based software is provided.)
•
Matrix Switcher's Control Program provides easy and powerful graphical control of matrix switches through the RS-232
interface. (Windows only.)
Optional Features
•
Dual redundant power supply.
MATERIALS
Materials Supplied with this kit:
•
ST- n X m -USBV-U NTI Multi-user USB KVM Switch
Materials Not Supplied, but REQUIRED :
•
USBVEXT- xx -MM cable for each CPU being connected to the switch
Where :
xx is the length of the cable in feet (3,6,10, or 15 feet available)
MM indicates male-to-male connector
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or 330-562-7070.
Options
The following options are available for the ST- n X m -USBV-U switch.
•
Dual Redundant Power supply (see page 25)
This feature ensures constant power to the ST- n X m -USBV-U switch.
This feature is ordered by adding a -DRP suffix to the main part number.