8. RS232 Extender Port
Connect a serial communications port to this 3.5 mm connector for
bidirectional RS-232 communication.
Port Setup Parameters:
Baud Rate : 2400.
Data: 8bit.
Parity: none.
Stop:1bit.
Flow Control: none.
9.
Reset
Occasionally like many network devices (routers, modems etc) it may
be necessary to reset the Receiver. This can be done by using a
small tool (eg: toothpick) to gently press and hold the reset switch for
approximately 3 seconds. Upon releasing the switch the unit will
reboot and restore its factory settings. Source channel settings will
remain as previously set and normal function should resume shortly.
Alternatively removing the Power Supply from the Power Input Port
for approximately 5 minutes will achieve the same result.