RECEIVER UNIT PANEL DESCRIPTION
1. Power LED
This LED indicator will activate once the included 5V DC power
adapter has been properly connected between the Transmitter unit
and a power socket.
Note: the LED will blink during the initial power up time during which it
is loading the device firmware.
2. Link LED
This LED indicator will flash once Cat 6. cable has been properly
connected between the Transmitter and Receiver unit. Once both
devices are connected and powered up this LED will stop flashing
and stay on to indicate successful connection between Transmitter
and Receiver.
3. IR Extender Port
Please connect the provided IR Extender cable to this port. This
allows the supplied remote control to function; the source device can
now also be controlled from the location of this receiver unit by way of
its original IR remote control or a universal type IR remote control.
4. LED Display
The LED Display is designed to identify which source device channel
the receiver is set to display. User can select source channel via the
provided remote control.
5. Power Input Port
Connect 5V DC power supply to this input port.
6. RJ45 Port
Connect a 100Ohm Cat.6 cable between this input port and the RJ45
output port from Transmitter unit or Gigabit network switch.
Note: for best performance we encourage the use of Stranded
CAT6A shielded cable STP (750Mhz), as a minimum though please
ensure CAT6 UTP (550Mhz) cable is used or poor performance may
result.
7. HDMI Output Port
Connect one HDMI cable between this output port and HDMI input
port of HDTV display.