NTI VEEMUX DVI VIDEO MATRIX SWITCH
5
OPERATING THE SM-4X4-DVI
Learn Mode
The VEEMUX is able to emulate a monitor for a connected video source, whether a monitor is actually connected or not. To do
this, the VEEMUX must first learn the specifications of a display device. To make the VEEMUX learn the specifications, use
“Learn Mode”.
Enter Learn Mode
1. Press and hold both front panel buttons simultaneously for 2 seconds.
2. The letters
L-E-R-N
will appear on the Input LEDs.
3. Pressing the “Input Select” button will scroll through each of three learning options, indicated by changing letters on the Input
LEDs:
L-E-S
= learn the specifications of any monitor connected to “Output 1”
L-E-P
= use the built-in specifications of a PC monitor
L-E-A
= use the built-in specifications of an Apple monitor
4. When the desired learning mode is displayed, press the “Output Select” button to execute the learning feature and return to
normal operation.
Change Connections Manually
Two buttons are provided on the front of the VEEMUX for quickly making connections between video sources and display devices.
To connect an Input (video source) to an Output (display device):
1. Press the “Output Select” button until the desired Output LED illuminates.
2. Press the “Input Select “ button to change the Input LED above the selected Output until the desired Input number is shown.
3. Press the “Output Select” button again to change a different Output-to Input connection
One video source can be set to display on all 4 display devices if so desired.
