NTI VEEMUX DVI VIDEO MATRIX SWITCH
4
CONNECT CABLES
1. Connect a DVI male cable between each video source and an “Input” connector on the rear of the VEEMUX.
2. Connect a DVI male cable between each display device and an “Output” connector on the rear of the VEEMUX.
3. If the VEEMUX will be controlled using RS232, then connect a DB9 cable between the “RS232” port on the VEEMUX and a
serial port on a PC.
4. Connect the AC adapter to the VEEMUX and plug it in to power the VEEMUX ON.
5. Power ON the video sources and the display devices.
Figure 1- Connect devices and sources to VEEMUX
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
INPUT 1
INPUT 2
INPUT 3
INPUT 4
RS232
IR
5VDC
3A
-
+
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
R
REAR VIEW OF SM-4X4-DVI
Mating Face of
DVI-I Single Link Male
DVD Player
Cable Box
DVI Monitor
Projector
HDTV
VGA
Multi-Scan
Monitor
PC
Mating face of a 9DB male
SERIAL
5VDC
Adapter
ADAPTER
Serial Control Cable
DVI-IS-xx-MM
DVI-IS-xx-MM
DVI-IS-xx-MM
DVI-IS-xx-MM
DVI-IS-xx-MM
