NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP
43
NTI Switch Control Program For Windows 9X, NT, 2000, XP, Vista and 7
The NTI Switch Control Program is an easy and powerful graphical program that controls NTI matrix switches through an RS232
interface. The NTI Switch Control Program is included on the CD packaged with the UNIMUX. The NTI Switch Control Program
is downloaded by clicking on the link "Download NTI Switch Control Program" found on the webpage the opens when the CD is
inserted into the CDROM drive.
To install the NTI Switch Control Program after downloading
1.
Locate the Setup.exe in the directory the program was downloaded to and double-click on it
2.
Follow the instructions on the screen
Note: In order to use the NTI NTI Switch Control Program to control the UNIMUX, the UNIMUX RS232 port must be set at
a baud rate of 9600 bps (see page 40).
The NTI Switch Control Program performs best on monitors set to a screen resolution of at least 800 X 600. Instruction for using
the NTI Switch Control Program is available by opening "MSCP Help" in the "NTI" program group once the program has been
installed and is open on the screen.
To open "MSCP Help" from the Windows desktop
1.
Click on
START
2.
Click on
PROGRAMS
3.
Click on
NTI
4.
Click on
MSCP Help