NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP
11
Figure 14- Remote Console Preview
A connection will be made between your remote PC and the RACKMUX Drawer. The screen that opens is a virtual PC that
enables you to control the RACKMUX switch just as if you were actually at the keyboard of the RACKMUX. Using the mouse,
switch between the virtual PC and your actual computer interface.
Instruction for operating the USB KVM Switch can be found on page 19.
Note: When using the OSD menu to control the
USB KVM
switch
from the remote PC
, use only the keyboard to navigate
the menus. The mouse will work as described in the UNIMUX-USBV-xHD manual when used from the RACKMUX-based
keyboard, but it is not reliable when used through the KVM on IP connection.
If the remote connection is closed while in the KVM on IP menu, to re-open the connection click on
“
Remote Control
”
, then
“
KVM Console
”
.
Note: There are more features available in the menu for the KVM on IP, but their use or configuration is not necessary in
the operation of the RACKMUX-V17-N-8USBHD-IP.
