NTI ENVIROMUX E-IMD-LCV2, Инструкция по установке и эксплуатации

Страница: 8 / 10

NTI INFRARED MOTION DETECTOR
5
OPERATION
Alarm Delay
The E-IMD-LCV2(P) is equipped with three jumper positions to choose from. Place the provided jumper in one of the following
positions:
15 MIN - After an initial alert is sent from the first motion sensed, there will be a 15 minute delay before the sensor will react to any
additional motion and send another alert. The sensor will send an alert every 15 minutes if it continues to sense motion. All
motion sensed between the 15 minute intervals will be ignored.
10 SEC - After an initial alert is sent from the first motion sensed, there will be a 10 second delay before the sensor will react to
any additional motion and send another alert. The sensor will send an alert every 10 seconds if it continues to sense motion. All
motion sensed between the 10 second intervals will be ignored.
Nor - There will be no delay. When the sensor senses movement, an alert will be immediately sent.
Test
When performing a product test, make sure the delay jumper is on the "Nor" pins for an immediate alert to be sent.
With the E-IMD-LCV2(P) connected to the ENVIROMUX (and power supply connected as applicable), the detector should be
ready to sense. Walking within the sensed range of the detector should provide an alert message to any user configured to
receive it. When sensed, the Red LED on the detector should illuminate for at least 2 seconds.