Reversible vibratory plates
Operating instructions
side 6
edition 06/2009
6.
Any changes and modifications of the machine can only be made with the manufacturer's express
consent.
1.1.6
Loading & Transportation
1.
The machine may only be loaded and transported using a device or a vehicle with the lifting or
loading capacity corresponding to the weight of the machine (see "Basic Specifications").
2.
When loading the machine with a crane, all the regulations applicable to work with a crane
should be observed. This should be done by a duly qualified person(s).
3.
The sling should be placed in the marked place on the machine frame.
4.
When handling the machine manually, more persons is necessary in order not to exceed
maximum permissible weight to be lifted by one person.
5.
During transportation, the machine should be sufficiently secured against overturning, falling or
shifting. The slings should be fixed on the marked place(s).
6.
During transportation, the shaft of the machine should be lifted and duly fixed in position.
THE CONTROL SHAFT (SEE 2.1 BASIC PARTS OF THE REVERSING PLATE)
SERVES FOR CONTROLLING THE MACHINE ONLY IF VIBRATION IS ON (working,
i.e. maximum speed is set). THE VIBRATING PLATE SHOULD NEVER BE LIFTED,
TURNED, FIXED, TOWED, ETC. USING THE CONTROL SHAFT AS ITS RESILIENT
MOUNTING WOULD BE DAMAGED.
IN CASE OF DAMAGE DUE TO MACHINES FROM THIS COMPANY IS NOT
RESPONSIBLE FOR DAMAGES!
1.2
Prohibited Operations
It is strictly prohibited:
:-
To use the machine for purposes other than those the machine is intended for;
:-
To control the machine in a different way from that set forth in the Operating
Instructions;
:-
To operate the machine under influence of alcoholic beverages or drugs;
:-
To operate the machine in such a manner that safety of persons, buildings, structures,
things or road traffic and its smoothness is endangered.
:-
To operate the machine if other persons are within the working radius of the machine;
:-
To operate the machine with any of its protective elements removed or damaged;
:-
To operate the machine in dangerous areas with imminent external danger such as
caving-in the machine, landslides, overturning the machine, release of dangerous
substances, risk of explosion or fire, electric shock hazard, etc.)
:-
To operate the machine in the areas where buildings, other structures or underground
services could be damaged (e.g. by excessive vibrations).
:-
To operate the machine within the protective zones of electric lines and transformer
stations;
:-
To cross electric cables with the machine unless they are sufficiently protected against
mechanical damage;
:-
To operate the machine at poor visibility or at night without sufficient illumination of the
whole workplace;
:-
To leave the machine while in operation or to leave the machine without having secured
it against unauthorized use;
:-
To disactivate safety and protective elements or to change their parameters;
:-
To operate the machine with leaking oil, fuel or other liquids;
:-
To start up the engine in a manner different from that mentioned in the Operating
Instructions;
:-
To clean the machine or to remove dirt while in operation;
:-
To smoke or use open fire when fueling or lubricating the machine, when checking the
fuel level or the accumulator.
