Asphalt and concrete cutters
Operation manual
Page
10
issued 01/2017
6.
Sticker with information that the machine can´t be
transported with running cutting blade.
7.
Sticker with information of fuel type
8.
Sticker BLACK ARROW (shows blade turning direction)
9.
Sticker WHITE ARROW (shows blade setting against cut
material at the depth scale.
10.
Sticker showing the depth scale
11.
Sticker showing the noise value which was measured by
test according to conditions NV no.9/2002 in machines
(types – see point 2.1).
The value is only informative, it differs for each machine
type.
1.9 Dispose of packing material
NTC STAVEBNI TECHNIKA spol. s r.o. is registered by company EKO-KOM a.s. There is an agreement done for
redemption of packing materials with EKO-KOM a.s. by NTC STAVEBNI TECHNIKA spol. s r.o. or packing
materials suppliers.
2. TECHNICAL DESCRIPTION
The asphalt and concrete cutters RZ are
intended for cutting of asphalt and concrete
floors or road layers when repairing roads,
industrial areas, etc.
The machine is based on a rigid frame with
fixed spindle; the cutting disc is lowered to the
cut together with the whole frame. Lowering
and rising of the cutting disc is controlled by
means of a arrested handle that enables fine
regulation of cutting depth.
The machine is intended for wet cutting and
therefore it is equipped with a sprinkling
system. Water for sprinkling can be brought
either from machines-mounted water tank of
from external source.
The machines can be used also for dry cutting,
assuming a suitable cutting disc is used. This
method however causes high generation of dust
and thus breathing protection would be required.
The machine is driven by a single-cylinder,
four-stroke gasoline engine HONDA.
Travel is manual; the operator pushes the
machines by height-adjustable handle.
Floor saws RZ are equipped with a reference
depth scale.
