HARDWARE OVERVIEW
3
7) VGA
Connect to the VGA port of the monitor which supports HDMI video output.
Note:
Dual video outputs via both VGA and HDMI ports are supported.
Note:
It’s not supported to connect to the VGA port of the monitor which
doesn’t
support HDMI video
output.
8) IR
Connect the IR receiver extension line for remote control.
9) eSATA
This port is used to connect a storage device supporting eSATA interface; for instance, an external hard disk or a
disk array.
Note:
Please purchase a disk array supporting Linux system to ensure your DVR to work properly.
10) Push Video Alarm In
(For selected models only)
Connect up to four external alarm devices for active event notifications to your smart phone (Push Video). The
four alarm inputs, 1 ~ 4, are corresponding to the four video inputs, CH1 ~ 4.
11) EXTERNAL I/O
This port is used to connect external devices (such as speed dome cameras or external alarm, etc).
12) LAN
Connect to Internet by LAN cable.
13) DC 19V IN
Connect to the supplied adapter.
14)
Power Switch
Switch to “
—
” to turn on the power, and “
” to turn off the power.
