Page 7 of 9
OPERATIONAL HINTS
1) Always place your dimmer packs as close as possible to the lights they are powering.
This will reduce the number of extension cords required to hook up your system.
2) Use a power outlet located as close as possible to an electrical service panel (fuse box). It is
best if the power outlet is on a separate circuit breaker or fuse from your audio system.
3) Ensure that the rating of the breaker or fuse for the chosen outlet is adequate. The required
rating (in amps) of the breaker or fuse may be calculated with the following formula:
I = P/E
Where I = the current (in amps)
P = the power (in watts)
And E = the voltage (in volts)
For example: if you are using six, 300 watt lamps (1800 watts total), you should have at least a
15 amp electrical service.
4) Always use quality 14 gauge (or heavier) grounded extension cords.
5) Do not place AG power cables or extension cords for lighting near sensitive audio
cables (guitar cords, mic cables, audio snakes, etc.).
