NSF AC10-PC Скачать руководство пользователя страница 39

 

39

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NORTH AMERICAN WARRANTY 

  

     All dispensing equipment manufactured by A.C. Dispensing Equipment Inc. is warranted against defects in materials and 

workmanship for a period of one (1) year from the date of purchase.     
     A. C. Dispensing Equipment Inc.'s obligation under this warranty is limited to the repair of defects as outlined by an A. C. 
Dispensing Equipment Inc. factory-authorized service agency or one of its sub-service agencies.   
     This Warranty does not apply to installation or problems because of installation.  This Warranty does not apply to normal 
preventative maintenance, maintenance or adjustment.     
     THIS WARRANTY WILL BE NULL AND VOID IF THE WARRANTY REGISTRATION CARD IS NOT RETURNED TO A. C. 
DISPENSING EQUIPMENT INC. WITHIN 60 DAYS OF PURCHASE.   
 
      This warranty is subject to the following conditions: 

  This warranty applies to the original owner only and is not assignable.   

  Only pre-authorized service agencies directed by A.C. Dispensing Equipment Inc. are to be utilized. 

  Should any product fail to function in its intended manner under normal use within the limits defined in this warranty, at the 

option of A. C. Dispensing Equipment Inc. such product will be repaired or replaced by A.C. Dispensing Equipment Inc. or its 
Authorized Service Agency.  A. C. Dispensing Equipment Inc. will be responsible only for charges incurred or service performed by 
its Authorized Service Agencies.  The use of other than A. C. Dispensing Equipment Inc. Authorized Service Agencies will void this 
warranty and A. C. Dispensing Equipment Inc. will not be responsible for such work or any charges associated with such work. 
The closest A. C. Dispensing Equipment Inc. Authorized Service Agency must be used and must be dispatched by A. C. 
Dispensing Equipment Inc. 
 
TIME PERIOD:   
One year on parts and labour, effective from the date of purchase.  The Authorized Service Agency may, at its option, require 
proof of purchase.  Parts replaced under this Warranty are warranted for the unexpired portion of the original product warranty 
only.  

 

24-hour Toll-Free Service is available at 

1-888-777-9990 or 1-902-865-9602 

 

A service consultant is available to assist you during our normal business hours.  All service-related issues will be addressed by a 
return telephone call the next business day. 
 
WARRANTY PROCEDURE:   

 

 

1. 

Secure the model and serial number from the data tag on the lower left side of the dispenser.  

2.    Call the number provided on the service label on the dispenser. 
3.   

Our technical support staff will discuss the issue with you and, if necessary, dispatch a technician to your location for 

repairs. If after-hours or emergency service is required, A.C. Dispensing Equipment Inc. will not be responsible for any 
additional charges.  

4. 

To order parts, call the service center and the appropriate parts will be sent to your location or that of the servicing 

agency. 

 

 

    

The following conditions are not covered by this Warranty: 
  

 Equipment failure related to improper installation, improper utility connection or supply, and problems due to ventilation. 

  

 Equipment that has not been properly maintained, calibration of controls, adjustments, damage from improper cleaning, 

and water damage to controls. 
  

  Equipment that has not been used in an appropriate manner, or has been subject to misuse or misapplication, neglect, 

abuse, accident, alteration, negligence, damage during transit, delivery or installation, fire, flood, riot, or act of God.  
  

 Equipment on which the model number or serial number has been removed or altered.   

 
If the equipment has been changed, altered, modified or repaired by other than a qualified service technician during 

or after the warranty period, then the manufacturer shall not be liable for any damages to any person or to any property, which 
may result from the use of the equipment thereafter. 
 

This Warranty does not cover services performed at overtime or premium labour rates.  Should service be required at 

times which normally involve overtime or premium labour rates, the owner shall be charged for the difference between normal 
service rates and such premium rates.  A. C. Dispensing Equipment Inc. does not assume any liability for extended delays in 
replacing or repairing any items beyond its control.   

In all cases, the use of other than A. C. Dispensing Equipment Inc. authorized OEM replacement parts will void this 

Warranty.   

This equipment in intended for commercial use only.  Warranty is void if equipment is installed in other than 

commercial applications.   

 

THE FOREGOING WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, 

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS AND CONSTITUTES THE ENTIRE 
LIABILITY OF A. C. DISPENSING EQUIPMENT INC.  IN NO EVENT DOES THE LIMITED WARRANTY EXTEND BEYOND 
THE TERMS STATED HEREIN.   

A.C. Dispensing Equipment Inc. 

100 Dispensing Way 

Sackville 

Nova Scotia, Canada 

11/2/2005 

 

 

 

 

           B4C 4H2 

Содержание AC10-PC









































Отзывы: