NSE UC-100 Plus, Руководство пользователя

Страница: 10 / 24

05
3 Installation and Operation
3.1 Camera Handle Installation
Before use, the camera handle and light source shall be installed first. The follow-
ing are its detailed steps:
(1) Rotate and tighten the optical mount to the handle.
(2) Squeeze the switch of the optical mount, and install the endoscope to the
mount. Then loosen the switch, and the endoscope will be automatically fastened.
(3) Install the light source optical fiber or an end of portable LCD light source with
nuts in the light input port of the endoscope. Then fasten the nut.
(4) After the front end of the handle is installed, insert its plug into the handle jack
on one side of the main recording unit. Also, insert the optical fiber or the other
side of the portable light source in the light output jack. Then the whole process is
completed.
Install the light source LED light output jack
Endoscope Optical Camera handle
Figure 2 Camera Handle Installation
Attention: The endoscope is fragile to impact, so please pay close attention to
the lens during installation.