CONNECTING THE GAS CYLINDER TO THE APPLIANCE
z
The appliance may only be used with butane, propane or a low pressure LPG mixture and with
a suitable low pressure regulator and a flexible hose. The hose must be securely connected to
the regulator and the appliance with hose clips. The barbecue operates with a 29 mbar
regulator for butane, 37 mbar for propane and 30 mbar for an LPG gas mixture. Use a suitable
regulator certified to BSEN 16129: 2013. Contact your LPG supplier for further information on
suitable regulators for gas cylinders.
z
Before connection, ensure that nothing is obstructing the top of the cylinder, the regulator,
burner or burner ports. Spiders and insects can get into and obstruct the burner's supply tube
orifice. An obstructed burner could cause a fire under the appliance.
z
Clean the burner orifices using a stout pipe cleaner.
z
When replacing the hose, it should be fixed to the appliance and to the regulator using hose
clips. Disconnect the regulator from the cylinder (following the instructions supplied with the
regulator) when the barbecue is not in use.
REGULATOR & HOSE
z
It is recommended that you change the regulator 10 years after its date of manufacture.
z
The hose should be changed when national regulations require.
It is recommended that you change the hose 5 years after its date of manufacture.
z
Using an unsuitable regulator or hose is dangerous. Ensure that the products that you have are
suitable for use with your barbecue.
z
The hose used must comply with the standards in force in the country of use. The hose must
be a minimum of 0.6 metres long and a maximum of 1.5 metres. A damaged regulator or hose
must be replaced. Ensure that the hose is not blocked, kinked or in contact with any part of the
barbecue other than the connection point.
STORAGE AFTER USE
z
Store the appliance indoors only if the cylinder has been disconnected and removed. If the
appliance is not used for a long period, it should be stored in its original packaging, in a dry,
dust-free location.
Gas cylinder
z
The barbecue may be used with 11 or 15 kg cylinders. The maximum size is 310 mm (diameter)
x 600 mm (height). The barbecue will run better if propane or LPG mixtures are used. Butane
can be used but, due to the appliance's power, the cylinder will have a tendency to freeze and
supply gas at a lower pressure, thus affecting the barbecue's performance. The gas cylinder
must be outside the barbecue.
z
The gas cylinder should be handled with care! Always disconnect the gas cylinder when not
using the barbecue. Replace the protective cap on the cylinder when not connected to the
appliance.
z
Keep any source of ignition well away when changing the gas cylinder.
z
Cylinders should always be stored outdoors, vertically and out of the reach of children.
Cylinders should never be stored in temperatures in excess of 50
°
°C. Never store gas
cylinders close to flames, burners or other heat sources.
NEVER SMOKE NEAR A GAS CYLINDER
This barbecue is designed for outdoor use, well away from any flammable material. Ensure that
any item located above the appliance cannot
obstruct
it and that both sides and the front of the
appliance are at least 1 metre from any item that could impede its operation. Ensure that the
appliance's ventilation holes are not obstructed. The barbecue should be place on a flat, stable
surface. The appliance should be protected from direct draughts and bad weather (rain, etc.).