6
applied, when released, the gap between the brake moulding and the wheel should
be between 1 to 3 mm. If either of the above conditions is not correct adjust the
brakes as detailed in the maintenance section, and re-check.
·
Check to make sure all other nuts, bolts and screws are tightly fastened.
·
Check all wheels are in good working order and roll freely.
5.2 Safety Checks
Perform the Pre-Use safety checks indicated in Section 3: If everything is working
correctly the Rollator is now ready for use.
Set Folding Frame
Lock, in locked
position
Securely fix
Push Handle in
Location Socket
Handle Tube
– Set
at correct height
Rollator shown in Fully Open Position
Push Seat down
to correct position
Footrests:
Shown down in
this view for use as
a Transit Chair,
Inset view "A"
show footrests in
upright position, for
use as a Rollator
DIAGRAM: 2
View "A"
Footrests in upright
position for use as
a Rollator
