NRI v2 eagle, Руководство по эксплуатации

Страница: 8 / 57

8
BA_v2_eagle_parallel_EN_1-0
a
bouT
...
2 About ...
This chapter is intended to provide a general overview of the advantages and options of the
coin validator v
2
eagle with parallel interface. The first section, however, is designed to help you
navigate easily within these operating instructions.
2.1 About these operating instructions
These operating instructions describe the design and operation of the electronic 5" coin validator
v
2
eagle with parallel BDTA or BACTA interface. Afterwards, chapters 6 and 7 explain the necessary
steps for starting up and operating the coin validator. Chapter 7 describes how to clean the coin
validator and remedy the cause of any malfunction.
Chap. 10 "Technical data" and the appended "Index" reduce the search for specific explanations.
2.1.1 Text conventions
To make it easier for you to navigate within these operating instructions and to operate the
device, the following accentuations were made in the text:
Safety instructions which you must observe in order to protect operators
and equipment.
Special notes intended to facilitate the use of the coin validator.
At the beginning of each chapter you will find a short "guide" which summarizes
the contents of the chapter.
Device functions which are set or prepared by the manufacturer according
to customer specifications and can be set or changed using our service and
configuration tools
(cf. Chap. 9 What subsequent settings can be made?, p. 42)
.
1 2 3 ... Requests to perform an action are numbered in a different typeface.
[ Fig. 1 / 2 ] Cross-reference to an illustration. The number preceding the slash indicates the
number of the figure, the number following the slash is the number of the item
in the figure.