D
ESIGN
AND
FUNCTION
OF
THE
G-46
G-46 MDB
20
National Rejectors, Inc. GmbH, Buxtehude
Fig. 5: Activate memory block 1
1
2
3
4
5
6
7
O
N
8
9
10
Selecting memory block 0 and 1 with DIL switch
The G-46 can manage two memory blocks 0 and 1 which are
configured independently. Each block has been allocated 2 times
16 coin channels with different coi values, sorting and inhibiting
information etc. The blocks are programmed according to
customers’ requirements at NRI. Always only one block is active
and can be used for coin validation.
Using DIL-switch 10 of the switching block, memory block 0 or 1
can be activated:
1. Remove the coin validator from the device at the top (fig. 3).
2. For block 1 set DIL-switch 10 into the right-hand ON position,
for block 0 into the left-hand position (OFF) (fig. 5).
3. Reinstall the coin validator.
4. Switch off and on the power.
The required memory block is activated.
