NRI G-13.6 Series, Техническая документация инструкция

Страница: 10 / 25

10
National Rejectors, Inc. GmbH, Buxtehude
G-13.6 Characteristic features of the system
Block switch-over
Starting with model no. G-13/1the validator offers the possibility to
have two configurations, independent from each other. To each of
these 'blocks' 12 individual coin channels are assigned with
appropriate tables (signals, denominations, sorting information). The
programming is done either at NRI or at a service station. Although
both blocks are programmed you can only work with one of them.
This type of validator can be recognized by the label with the extended
indications.
This function is ideal for storing additionally to the actual currency a se-
cond coin combination with individual interface information (table). For
example in case of a currency conversion the actual settings are
deactivated and the new ones are activated. A further application can
be if independent from currency an alternative vending machine
interface is selected.
For standard devices the switch-over is done by only one DILswitch!
On the rear of the G-13 two switch arrangements are positioned. For
switching over from block 0 to block 1 please use switch no. 8 of the
right-hand switch arrangement. Please proceed as follows:
•
Switch off power supply.
•
Switch on switch no. 8 of the right-hand switch arrangement
– lower position = block 0 active only (left side on label)
– upper position = block 1 active only (right side on label)
•
Switch on power supply.
•
Check coin acceptance (please refer to label).
ON
OFF
block switch-over
1 2 3 4 5 6 7 8