NRG ENERGY RWC-1, Инструкция по эксплуатации

Страница: 4 / 88

EN
Safety Notes
• ENERGY RWC-1 may not be used on uneven surfaces such as frosted,
textured or patterned glass or plaster. NRG ENERGY cannot be held
responsible for damage caused by improper use of the device on surfaces
that are not recommended or suitable for the robot.
• ENERGY RWC-1 is only suitable for vertical glass surfaces with or without
a frame.
• The included remote control is required to clean horizontal surfaces using
ENERGY RWC-1 .
• ENERGY RWC-1 may only be used on windows the frame of which is at
least 5 mm thicker than the glass.
• ENERGY RWC-1 may not be used on surfaces measuring less than
50 x 70 cm.
• If the glass surface is particularly dirty, clean a small portion of the window
and position NRG ENERGY RWC-1 in the clean spot.
• ENERGY RWC-1 must be connected to the mains at all times during
operation.
• Make sure that the distance between the surface that requires cleaning and
surrounding obstacles (curtains, furniture) is at least 10 cm.
• ENERGY RWC-1 can be used to clean slanted surfaces using the included
remote control. However, the device might not function properly,
depending on the inclination of the surface. In this case, the device must be
operated under supervision to ensure that someone is able to intervene if
problems occur. Always use the safety system!
• ENERGY RWC-1 must not be used upside down.
• ENERGY RWC-1 is designed for regular cleaning of glass surfaces.
The device is not designed for intensive or initial cleaning. In addition, it is
not intended for commercial use.
• The device may not be used on wet or greasy windows.
• The device may be used to clean outside window surfaces or tall windows
provided that it is properly secured by the safety system. However, the
device may only be used in gentle wind and is not suitable for use in rainy
or snowy conditions or temperatures below 10 °C.
2