NRD Corona Staticmaster 6220, Установка, эксплуатация и обслуживание

Страница: 5 / 6

NRD USA / 2937 Alt Boulevard / PO Box 310 / Grand Island, NY 14072-0310
PHONE 716 773 7634 / FAX 716 773 7744 / EMAIL sales@nrdllc.com / WEB www.nrdllc.com
NRD Asia Pte. Ltd / 114 Lavender Street #08‐90 CT Hub 2 Singapore 338729
PHONE +65 6679 1707 / EMAIL sales@NRDasia.com / WEB www.nrdllc.com
- 5 -
INST6220_05/18
4-3. Filter Cover Cleaning

Remove filter cover from top panel of main enclosure.

Clean filter cover with water or compressed air.

After cleaning, make sure ionizer is dry before turning power on.

If there is any damage on the filter cover, it is recommended to replace it.
4-4. Emitter Point Replacement

Remove filter cover from top panel of main enclosure.

Remove emitter points from sockets by gently pulling out toward the middle of the ionizer. Caution ,
emitter points are very sharp, using tweezers or pliers is acceptable.

Insert new emitter points into sockets by gently pushing in as far as it will go. Caution , emitter points are
very sharp, using tweezers or pliers is acceptable.
NOTE: Emitter point useful life also varies based on operating environment and use. Recommended
replacement interval is once a year to once every other year.
5. Specification
Input Voltage 110 ~ 240V AC
Ion Emission Steady-State DC Technology
Balance < ±20V
Discharge less than 2 seconds per ANSI/ESD STM3.1
3 Step Fan Speed Adjustment
Air flow 27 ~ 100 CFM
Emitter Point Tungsten 99.99%
Alarm Function Audio/LED Alarm at HV Power failure
Output Monitoring FMS Interface
Material ABS for Ionizer Enclosures and Brackets
Operating Environment Temperature: 15~35
℃
Relative
Humidity: 35~75%
Dimensions (W×H×D) 4.7” x 7.1” x 39.4” (118×180×1000 mm)
Weight 7.9 lbs. (3.6 kg)