8 Installation
PCS-9785 Satellite-Synchronized Clock
8-3
Date: 2019-07-05
Air must not be allowed to circulate freely around the equipment.
The equipment can in principle be mounted in any attitude, but it is normally mounted vertically
(visibility of markings).
8.6 Mechanical Installation
NOTICE!
It is necessary to leave enough space top and bottom of the cutout in the cubicle for
heat emission of this device.
This device is made of a single layer 4U chassis. Following figure shows the dimensions and
cutout size in the cubicle of this device for reference in mounting.
482.6
465
10
1.
6
4-Ø6.8
465±0.2
451
+0.4
-0
10
1.
6±
0.
1
(290)
17
7
17
9
+0.4 -0
Front
Side
Cut
-
out
Figure 8.6-1 Dimensions (unit: mm, 4U 19" rack)
The following figure
shows the installation way of a module being plugged into a corresponding
slot.
08020
08020
08020
08020
08020
08020
08020
08020
08020