10
Before using the ORON 58 Device please follow the next steps:
Wear disposable gloves
Make sure all cables are securely connected
Power the base unit On and activate the Piece (make sure the Electronic Circuit
Led is blinking)
ORON 58 Power on:
Press the Power key
Press the Piece key
Press the foot pedal (the foot pedal is momentary action based. It will stop the Piece
activation as soon as it is released)
ORON 58 Power off:
Release the foot pedal
Press the Piece key
Press the Power key
Preparing the device for usage:
Connect the handle cable to the to the control unit connector labeled PIECE
Connect the foot pedal to the control unit connector labeled PEDAL
Connect the power supply cable to the control unit connector labeled 12VDC
Press the POWER key
Press the PIECE key
Select the integral needle suitable for the treatment
Place the needle in the handle head and rotate quarter turn clockwise to lock the
needle in position
Press the foot pedal
To adjust needle position, hold the handle base in your left hand (needle pointing
up). Turning the needle holder clockwise will decrease needle height. Turning the
needle holder counter clockwise will increase needle height.
Getting Started
