FMC32 Hardware User's Manual
YA7174-0E
- 3 -
3. Outline
The FMC32 can register up to 32 operation patterns and up to 256 steps of execution sequence program in the
internal memory and automatically process them in the registered sequence using only the board.
To control operation patterns, Pulse control LSI PCD 2112 for Serial Bus Control is equipped.
The FMC 32 contains a 2 phase stepper motor driver (NP3775E3) to drive bipolar stepper motor.
Through the use of a switch, the FMC32 can output pulses to external drivers.
4. Features
- FMC32 can register up to 32 operation pattern and up to 256 steps of execution sequence program in the
internal memory and automatically process them in the registered sequence using only the board (without
connecting to the PC).
- To control the operation pattern, pulse control LSI PCD 2112 for serial bus control is equipped.
- The FMC32 contains a 2 phase stepper motor driver (NP3775E3) to drive a bipolar stepper motor. It has a
switch to choose between full step and half step excitation.
- Through the use of a switch, the FMC32output pulses to an external driver.
- FMC32 contains a DC-DC converter for control power supply, you need only DC +24 to operate this device.
- Using a dedicated USB to 4-wire serial conversion unit (PUSB-3503), you can write and save operation patterns
and execution sequence programs to the nonvolatile memory easily through USB.
- If you use the dedicated software, you can design an operation pattern while confirming one operation to be
executed. Additionally, you can debug by simulation (actual or virtual operation) after creating the execution
sequence program and compiling it (checking the descriptive content).
