background image

 

 

- 33 - 

WARRANTY REGISTRATION FOR NEW UNITS 

Complete and send to NPK after installation or complete online at  

www.npkce.com

. 

Online warranty registration can be done by the dealer or the end user. 

 

The registration can be done in any of the following ways: 

1.  Mailed to: 

NPKCE 

7550 Independence Dr. 

Walton Hills Ohio 44146 

2.  Faxed: 440-232-6294 (U.S.) (+1) (440)232-6294 (outside U.S.) 

3.  Completed online at: 

www.npkce.com

 

The online registration can be done by the dealer or the end user. 

Dealers:  

  In the tool bar click on DEALERS.

 

  Using your username and password, log into the system. 

  At the left of the next page click on REGISTRATION. 

  Complete the fields with an orange diamond next to them. 

  At the bottom of this area, click the START REGISTRATION box and continue. 

  If the registration is completed online, there is no need to mail or fax the warranty 

 registration. 

 

End users / non NPK dealers 

  In the tool bar click on DEALERS

 

  You do NOT need to fill in username and password.

 

  In the left column, click on the REGISTRATION.

 

  Complete the fields with an orange diamond next to them. 

  At the bottom of this area, click the START REGISTRATION box and continue. 

  If the registration is completed online, there is no need to mail or fax the warranty 

 registration. 

Содержание NPH-3500










































Отзывы: