Step 13 - Position the folded canopy up the left side of the container. Bring stiffener cover flap over canopy and
tep 14 – Fold canopy back at the top edge of the pack tray and place it in the right hand side of the pocket.
tep 15 - Fold canopy back halfway between links and edge of pocket and place in the right hand side of pocket
tep 16 - Fold canopy back at the top edge of pocket to bottom on right side.
tep 17 – Repeat step #16 until you reach the apex, spread the material from side to side after each fold.
tep 18 – All folds should be the same size as the diaper on the left side.
tep 19 - The last short fold will also be slightly fanned out to reduce bulk and should be placed on top of all the
tep 20 - S fold the bridle between the grommets on the stiffener base. Thread the pull up cords through the
use one shot bag to prevent canopy from moving out of pocket.
S
Spread the material between the right side of the pocket and the diaper.
S
(spread the material between the right side of the pocket and the diaper.
S
S
S
S
previous folds towards the center of the pocket and with apex lines protruding from pocket mouth. DO NOT
STUFF APEX INTO CORNERS OF POCKET! Tuck apex lines under between folds with bridle emerging
towards center of container tray.
S
container locking loops, then through the two grommets in the tabs at the base of the pilot chute.
Emergency Parachute Manual P/N 81101-2P (Revised May 2004)
- 18 -