DPA-2FL User Manual
___________________________________________________________________________
___________________________________________________________________________
version 1.1
page 11
5. Technical Data
DPA-2FL
Input range:
±12 V; protected up to 15 V
Input impedance:
1 M
, related to ground
Input capacitance:
30 pF
Noise:
<5 µV rms @ full bandwidth (8 kHz) and gain 10k
OFFSET compensation: set by potentiometer, range x0.1 or x1, set by toggle switch
HIGH PASS FILTER: single pole, attenuation: -6 dB / octave, corner frequencies (Hz): DC;
0.1, 1, 100, 300, 600
LOW PASS FILTER:
single pole, attenuation: -6 dB/octave, corner frequencies (Hz): 50,
100, 1k, 3k, 5k, 8
NOTCH FILTER:
50 Hz or 60 Hz
GAIN:
rotary-switch 10, 100, 1k, 2.5k, 5k, 10k
Output:
range: ±12 V into 1 k
/ ±1 V into 50
Size:
front panel 12 HP (60.6 mm) x 3U (128,5 mm), 7” (175 mm) deep
EPMS-07 SYSTEM
Power requirements:
115/230 V AC, 60/50 Hz, fuse 2 A / 1 A, slow, 45-60 W (dependent
on the modules plugged in)
Dimensions:
19” rackmount cabinet, 3U high (1U = 1 ¾” = 44.45 mm)
