12
Eng
lish
MENU INFORMATION
4 . Motor Setting : Press OK
key to the Motor Setting win-
dow .
Satellite : Press
key s
to select the satellite in circle .
Or press OK key to pop up the
drop down list , then select
the desired satellite in the list
and press OK key to confirm
Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position.
You can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the drop-down list, select the proper position (re-
ference or from 1to 63) to realize the selected position.
West <Save> East: Press key to turn west, while press key to turn east.
Press OK key to pop up the dialogue "Are you sure to change this satellite's posi-
tion?". Press OK key at the Yes button to save the current position, or press OK
key at the No button to cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this
satellite's position?". Press OK key at the Yes button to recalculation.
5. Limit Setup: Press OK key to
pop up the Limit Setup window.
Limit Setup: Press
keys to switch among Disable
Limit, East Limit and West
Limit.
Limit Setup: Move cursor to
the Limit Setup button. You
can press key to turn west , or press key to turn east.
Go to Reference: Press OK key to go to reference. If you select Disable Limit in the
above Limit Setup item, this button will turn grey.
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press keys to switch between West and
East, or press keys to switch between North and South. Press OK key to
enter into the editing mode.
Use numeric keys (0-9) to
input the longitude or latitude,
press MENU key or EXIT key to
exit. The range of the longitude
is from 0 to 180,while the
range of the latitude is from 0
to 90. If the inputted value is
not in this range, system will
pop up a dialogue "Our of Range" when exit from this window. You can press OK
key to close this dialogue.
7. Motor Setting: Press OK key to enter into the Motor setting window.
Satellite, Transponder: Press keys to select satellite or transponder, or
press OK key to pop up the drop-down list and select in the list.
2.4 Single Satellite Search
1. Satellite : Press keys to select the satellite in circle. Or press OK key to
pop up the drop-down list, then select the desired satellite in the list and press OK
key to confirm.
2. FTA Only: Press keys
to select between Yes and No.
3. Scan Channel: Press
keys to select among
TV+Radio, TV Channel
Содержание DSR 4008 A
Страница 20: ......