7
Monta¿: krok 2
Przykrêciæ Peda³y (7R&7L) do kor-
by (6R&6L) za pomoc¹ nakrêtki
z blokad¹ (32) u¿ywaj¹c klucza
(34) i œrubokrêta (33). Peda³y s¹
oznaczone L – lewy oraz R – pra-
wy. Mocujemy peda³y tak jak jest
to pokazane na rysunkach (2a)
i (2b).
Monta¿: krok 2
Attach the Pedals 7R&7L) to
Cranks (6R&6L) as shown in fiigure
2 and use Spanner(34) & Screw-
driver/Spanner(33) provided to
tighten the left pedal (7L) to the left
side crank (6L) and the Right Pedal
(7R) to the right side crank (6R),
the Pedals are marked "L" for Left
and "R" for Right.
Important:
Turn Ne Nylon Nut
(32R & 32L) toward the front of
the Cycle until the Pedals (7R &
7L) are tightened. (See figure 2a
& 26).
6
rys. 1 / figure 1
rys. 2a / figure 2a
rys. 2b / figure 2b
