28
EN 28
4
FOR ALL THE HOODS except the Touch 894-895-896-897-898-899)
Cut off the excess part of the flat cable using a snap-off blade knife unto the connector. Only use the flat cable with
the black sheathing.
Attention! Make sure the device is not live!
5
Attach the flat cable of the kit using the electronics unit of the cooker hood.
The red-marked side of the flat cable must be
oriented toward the
inside
of the controller
for the following types of controllers (see
sticker on the controller) 7000512/ 7000514/
7000516/ 7000517/ 7000518
The red-marked side of the flat cable must be
oriented toward the
outside
of the controller
for the following types of controllers (see
sticker on the controller) 7000534/ 7000536/
7000538/ 7000539
Possible connections for each model:
Mini Pure’line (810-811-820-821-826)
- Flat cable can be led inside through an existing slot on the rear side of the cooker hood.
- Connect the flat cable to the control board. The control board is located behind the service access, which is
visible once the grease filter has been removed from the hood.
Pure’line (6830-6831-6833-6834-6835-6836-6838-6839-6840-6841-6843-6844-6845-6846-6848-6849)
Pure’line Compact (6810-6811-6812-6820-6821-6822)
- Flat cable can be led through the existing openings in the top of the hood.
- The service access is behind the bottom plate. Open this and connect the flat cable to the control board.
Flat’line / Pro’line / Head’line 7800-7805 / Vlakscherm 663-693 / Maxi Pure’line 855-856
- You must make an extra opening in the electronics housing through which the flat cable can be led in order to
make a connection with the cooker hood.
- Use the cable tensioner supplied to secure the flat cable, if necessary.
For connecting all cooker hoods except Touch go to step 18
