7
Step 2 – Setting Up GPS Connection
Important:
For the initial GPS lock on, the camera must be powered for approx
20 minutes. The vehicle must be in an open clear area. Not inside a garage or
an area where GPS connection will be affected. A flashing blue light indicates
camera is recording without GPS data. Constant blue light indicates the camera
the is recording with GPS data.
(See page 37 for Buzzer/LED Alert Warnings)
Note:
GPS is sometimes unable to connect to a satellite in vehicles fitted with fully
heated windscreens or metal trims around the front window.
2.16 Insert power adaptor into the camera power port and insert cigar adaptor
into the car cigar socket.
2.17 Turn the vehicle engine on.
2.18 Leave the camera powered on until blue light is on constantly to indicate
GPS has locked on..
2.19 Once the camera has locked onto GPS, turn the vehicle engine off and
safely remove the SD card once the camera has completely shut down.
Important; After setting up the camera and GPS for the first time, install the PC
Player onto a PC and set Date and Time through the Settings button on the
software. Follow the next steps to complete installation.
2.
Quick Start Guide
-
Setting Up GPS
