Novus NVIP-6F-6301, Руководство пользователя

Страница: 7 / 40

NVIP - 6F - 6301 User ’ s manual ver.1.0
All rights reserved © AAT Holding S.A.
7
Caution:
It is forbidden to use – as the camera power source – PoE equipment (adapters, etc.) not compatible
with IEEE 802.3af standard (items called “ passive PoE power supply ”). Damages that results from
the usage of improper power supply source are not covered by the warranty.
Caution:
Camera connectors / sockets are not hermetic. The user should ensure their hermeticity on his
own.
Caution:
Please note that the wall or ceiling must have enough strength to support the IP Camera.
Caution:
In order to obtain declared degree of protection please seal the camera base to prevent water
getting inside. Furthermore, when installing the camera on rough/uneven surfaces, please
additionally seal the junction with appropriate sealing mass. Please pay special attention to any
mounting holes and if they are a loop - through ones, seal them too.
Caution:
The declared degree of protection of the camera relates to its housing and does not take into account
the possibility of moisture infiltration into the interior of the camera by connecting cables.
Connection cables protection through i.e. sealing up is the responsibility of the camera installer. The
manufacturer is not liable for any damages to the camera caused as a result of failing in performing
that activity by installer, which also means that camera damaged in that way is not subject to
warranty repairs.
2. START - UP AND INITIAL IP CAMERA CONFIGURATION
2.1. Description of connectors and control tools
1. 100 Mb/s Ethernet port (RJ - 45)
2. Audio input (jack 3.5mm )
3. Audio output (jack 3.5mm )
4. Video output BNC - for service purpose
5. Alarm IN/OUT
6. RS - 485
7. Power supply 12VDC
8. Reset button
9. MicroSD card slot
START - UP AND INITIAL IP CAMERA CONFIGURATION