Novus NVIP-6F-6301, Руководство пользователя

Страница: 18 / 40

NVIP - 6F - 6301 User ’ s manual ver.1.0
All rights reserved © AAT Holding S.A.
18
ELECTRIC CONNECTORS AND ACCESORIES
6. ELECTRIC CONNECTORS AND ACCESORIES
6.1. Connecting power supply to the camera.
The camera can be supplied by using RJ45 network socket or by power connector. To run NOVUS IP
camera you can connect ethernet cable between camera and network switch with PoE support (IEEE
802.3af). You can also use a power injector with (IEEE 802.3af) PoE standard. Use power supplay with
parameters compatible with camera specification to power camera via power in jack.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user ’ s
manual.
SCHEMA OF 12VDC POWER SUPPLY CONNECTOR
Caution : Make sure to follow the correct polarity if connecting the camera to DC power.
Polarity is marked on the power connector.
Caution: In order to provide protection against voltage surges/lightning strikes, usage of
appropriate surge protectors is advised. Any damages resulting from surges are not eligible for
service repairs.
Caution: It is forbidden to use as the camera power source PoE equipment (adapters, etc.) not
compatible with IEEE 802.3af standard (items called “ passive PoE power supply ”). Damages that
results from the usage of improper power supply source are not covered by the warranty.
6.2. Connecting alarm inputs/outputs.
Alarm input
Alarm
input ( - )
COM0
(orange)
IP Camera
Alarm
input (+)
ALM - INA
Switch/sensor