Novus NVIP-6F-6301-II, Быстрый старт

Страница: 19 / 40

All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
19
NVIP - 6F - 6301 - II Quick start guide version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
19
FACTORY SETTINGS RESTORING
6.2. Software factory settings restoring via NMS IPTool
NMS IPTool (version 3.5 or later) allows to restore factory settings. To restore settings via NMS
IPTool, find the camera in the list of available devices and then, on the right side of the row click , .
Then within 30 seconds disconnect power of the camera. After reconnecting the camera, all settings are
factory default.
6.3. Hardware factory settings restoring
In order to restore factory settings using reset button (RST), please follow the instructions below:
•
Pry the magnetic cover (1)
•
Unscrew two locking screws and remove service panel (2).
•
Press the RESET button (3) and hold on for 10 seconds. Non metal, thin object (e.g. match) is
recommended for pushing it.
•
Release button.
•
Mount service panel (2) and screw 2 locking screws.
•
Mount the cover (1).
•
Log on after aprrox. 2 minutes using default IP address (http://192.168.1.200) and default user name
(root) and password (pass).
1
2
3