Novus NVIP-6F-6301-II, Быстрый старт

Страница: 10 / 40

All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
NVIP - 6F - 6301 - II Quick start guide version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
2.3. Camera mounting
To mount a camera please follow the instructions below:
•
Remove the magnetic cover (2) using the gap (1).
•
Use the mounting template or the camera base plate to mark holes for mounting screws (3).
•
Drill holes in marked places and optionally make an extra hole for camera cables.
•
Put the electric cable in place. Install the camera using included mounting screws (4).
•
Put the magnetic cover (2) on the camera.
CAUTION!
Please note that the wall or ceiling must have enough strength to carry the IP Camera.
CAUTION!
In order to obtain declared degree of protection please seal the camera bracket to prevent water
getting inside. Furthermore, when installing the bracket on rough/uneven surfaces, please
additionally seal the junction with appropriate sealing mass. Please pay special attention to any
mounting holes and if they are a loop
- through ones, seal them too.
START - UP AND INITIAL CAMERA CONFIGURATION
1
2
3
4